brand new practical guide to reading your bill

Energy saving starts with us and our good home habits! One of all, the correct reading of one’s bill, to have full control of consumption and to better understand how to “adjust the shot” to prevent waste and promote energy savings within the home and the family unit. In this article you will find some useful tips on how to read your bills!

Photo and image gallery

The arrival of a bill it’s never a good time, especially if you don’t know how to read it well and you don’t manage your household energy consumption. Yet, reading your bills is not an impossible task, if you know what to look for and what values ​​to pay attention to.

Not only that: it is an extremely useful operation, because it allows us to have one complete overview of consumption, from which to draw valuable information to improve our home habits in terms of energy use. Furthermore, knowing how to read a bill correctly allows us to immediately identify any anomalies, to be reported immediately to the supplier to avoid additional costs or unnecessary waste.

If you are interested in starting to read your bills, but you do not know how to do it, this is the article for you: in the next paragraphs you will find a practice guide to the complete reading of the bill!

Energy saving: practical guide to reading your bill

The information contained in the bills

In the bills we find, mainly, the cost to be paid to our supplier calculated on the basis of the energy consumed in the billing period and the contract we have entered into. Attention: what we are charged is proportionate to the energy costs of the supplier we have chosen and the contract that we have decided to activate with the aforementioned supplier: they should not, therefore, be new or surprise us, if we have carefully read the subscription conditions.

If you have any doubts, we therefore suggest that you review your contract again or ask the supplier to send you a copy, in case you have lost it.

However, it is important to know that in the bills there is not only the total amount to be paid to our energy supplier, but there are also many valuable information regarding our consumption. To understand which ones, we will explain in detail the items contained in a normal electricity bill and, finally, those that you can find in the gas bill.

How to read the electricity bill

Energy saving: practical guide to reading your bill

All electricity bills are drawn up following a very similar approach, established by theRegulatory Authority for Energy, Networks and the Environment. The graphics can change, from supplier to supplier, but the information and data remain the same and are always the same.

Here is the data contained in your electricity bills:

  • supplier data;
  • customer data (i.e. your data);
  • the Pod code;
  • the address of the supply;
  • the reference market (free or with enhanced protection);
  • the Rai license fee;
  • costs;
  • the fiscal detail of the costs;
  • consumption billed and data collected by the meter.

It may be that your bill also contains other additional items, such as lo consumption historywhen you receive your next bill, an overview of the annual consumptionlo payment status of your bills and any offers reserved for you.

Normally, in the first page of the bill of the light are contained i supplier data, your data, the target marketupdates on the status of payments and, in the boxes on the right, the amount duewith the subdivision into cost of light consumption and cost of the RAI fee.

In second page we find, instead, i details of the total amount to be paidwith all the items of expenditure, and a summary of the contractual conditions relating to cost and consumption.
In third page it is usually possible to find the information on self-reading and on the television license. On the following pages, if present, you can view the details of consumption and the various items.

In addition to these general indications, which are quite simple to read and understand, you will find many tables and pie charts, examples of other more specific and technical information regarding your consumption and your supply contract. Here is a summary glossary to “translate” the data of your electricity bill.

What is “expenditure on energy matter”

Energy saving: practical guide to reading your bill

The so-called “Expenditure on energy matter” it usually consists of two shares: one fixed it’s a variable. The fixed one is decided by the supplier and is used to cover management costs, such as customer service that you can use in case of doubts, questions or problems. That variable concerns the actual cost of the energy consumed.

What is the “expense for the transport of electricity and the management of the meter”

Energy saving: practical guide to reading your bill

Energy, to be used, goes transported up to the consumer’s home and this transfer has a cost. So, the “Expenditure for the transport of electricity and the management of the meter” it concerns the costs of transporting energy to your home and to your meter.

What is the “expense for system charges”

Energy saving: practical guide to reading your bill

One of the most ambiguous and poorly understood items of the bills. The system charges constitute a partial coverage of all those activities that generally affect the electric systemsuch as research, support for renewable sources, subsidies for the railway system, electricity bonuses and the decommissioning of nuclear power plants.

What are the taxes in the bills

To the above costs must be added the taxesthat is the taxeswhich are excise and VAT. They must be paid in all cases, regardless of the supplier chosen. As far as domestic customers are concerned, taxes “weigh” on the total cost of the bill for approximately 11.1%.

What does “maximum power drawn” mean

This entry indicates the maximum level of power drawn each month, based on the data collected by your meter. Usually this data is presented for every single month and compared with the previous and subsequent months through a convenient graph. This is very useful information, however keep an eye on monthly consumptionget an overview of the annual ones and make smarter and more informed choices about home energy use.

What are the items “supply voltage”, “committed power” and “available power”

There supply voltage is the voltage at which the current is delivered and is a value expressed in Volt: the supplies of electricity for domestic use are usually in Low Voltage and are around 220-230 Volts. There “Committed power” is how much the supplier makes available to the customer in terms of levels of power. It is a value that is defined for contract according to the customer’s needs and the number of electrical appliances used. There “Available power” it is usually a little higher than the “committed power” and is the maximum power level that the customer can draw from the system: once this value is exceeded, delivery stops.

How to read your gas bill

Energy saving: practical guide to reading your bill

The gas bills they do not differ much from those of light in terms of the information they contain. So, also in our gas bill we will find:

  • supplier data;
  • customer data (i.e. your data);
  • the address of the supply;
  • the reference market (free or with enhanced protection);
  • costs;
  • the fiscal detail of the costs;
  • consumption billed and data collected by the meter.

Furthermore, also in the gas bill we will have the items “expenditure for energy matter”, “expenditure for energy transport”, “system charges” and taxes. Obviously, we will not find the data and information that in the electricity bill concerned the values ​​of the electric power, because in this case we are talking about gas.
Here are some terminologies and words to know to better read your gas bill.

What is the “corrective coefficient C”

The actual gas volume it is highly variable and is subject to changes dictated by the temperature and external pressure. The correction factor C is a coefficient used to convert the gas consumption measured by the meter into the unit of measurement useful for billing, i.e. not cubic meters (cubic meters), but smcthe standard cubic meters (used to measure gas at standard conditions of temperature and pressure).

What is the “agreed higher calorific value”

Energy saving: practical guide to reading your bill

This data indicates the amount of energy that can be obtained from the combustion of a standard cubic meter (smc) of gas. As we said before, the standard cubic meters indicate the gas maintained at standard and invariable conditions of pressure and temperature.

Gallery of ideas and photos of practical guide to reading the bill

Now that we have a little clearer how to read our bills, all you have to do is take a look at our photogallery. Inside the references to the article we have just read, designed to refresh our memory. Let’s take a look!

Source link

About Eric Wilson

The variety offered by video games never ceases to amaze him. He loves OutRun's drifting as well as the contemplative walks of Dear Esther. Immersing himself in other worlds is an incomparable feeling for him: he understood it by playing for the first time in Shenmue.

Check Also

Bills alarm, in this case you risk the disconnection of electricity and gas to the entire building

Attention, as in this case you risk the disconnection of electricity and gas to the …

Leave a Reply

Your email address will not be published.